Çiçekli, HasanGökçen, Ahmet2024-09-192024-09-192013978-146735562-9https://doi.org/10.1109/SIU.2013.6531280https://hdl.handle.net/20.500.12483/141082013 21st Signal Processing and Communications Applications Conference, SIU 2013 -- 24 April 2013 through 26 April 2013 -- Haspolat -- 98109In this study, a new voltage mode notch filter based on Current Differencing Transconductance Amplifier (CDTA), which is a recently common used active building block in analog signal processing applications, is presented. The proposed filter's performance has been evaluated by PSPICE. In simulation the MOSIS CMOS 0.35?m model parameters used for CMOS based CDTA. The simulation results show that the proposed filter has high performance in terms of working both at low and high frequencies. It was seen that the simulation results verified the theory. Also, the sensitivities of the passive circuit components are shown to be low. © 2013 IEEE.trinfo:eu-repo/semantics/closedAccessCurrent differencing transconductance amplifier (CDTA)Notch filterRealization of voltage mode notch filter based on current differencing transconductance amplifierFarksal akimli geçis iletkenligi kuvvetlendiricisi tabanli gerilim modlu çentik süzgeç gerçeklenmesiConference Object10.1109/SIU.2013.65312802-s2.0-84880877921N/A