Yazar "Şen, Faruk" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • Küçük Resim
    Öğe
    Effect of stacking sequences on failure behavior of pinned E-Glass/epoxy composite plates
    (2008) Şen, Faruk; Pakdil, Murat
    In this study, the effect of stacking sequences on failure behavior of pinned composite plates was investigated. The laminated composite plates were made from epoxy matrix and glass fibers as reinforcement material. To observe the influences of joint geometry and stacking sequence on the failure mechanism, failure analysis were carried out experimentally. The nine different laminated composite plates were tested. The edge distance-to-hole diameter ratio (E/D) of specimens was designed from 1 to 6. Besides, the specimen width-to-hole diameter ratio (W/D) was only considered as 6. Experimental results point out that failure behavior is strictly influenced from both stacking sequences and geometrical parameters of composite specimens.
  • [ N/A ]
    Öğe
    An experimental study of glass-epoxy laminated composite pin-joints
    (2007) Pakdil, Murat; Şen, Faruk
    In this study, an experimental failure analysis of glass-epoxy laminated composite joints was performed. The effects of joint geometry and stacking sequences on the failure response were investigated. Therefore, the nine different laminated composite plates were tested. The width-to-hole diameter ratio (W/D) of specimens was designed from 2 to 5, whereas the edge distance-to-hole diameter ratio (E/D) was only considered as 6. According to experimental study results, bearing strengths and failure modes of single pinned composite plates was strictly influenced from both stacking sequences and geometrical parameters.