Yazar "Bonin, Guido" seçeneğine göre listele

Listeleniyor 1 - 8 / 8
  • [ N/A ]
    Öğe
    Design and validation of a 30,000 kg heavy goods vehicle using LS-DYNA
    (Amer Soc Mechanical Engineers, 2005) Atahan, Ali O.; Bonin, Guido; El-Gindy, Moustafa
    Extraordinary developments in virtual crash testing research have been achieved during the past decade. Advancements in hardware and software technology along with improvements in computation mechanics and increased number of full-scale crash tests contributed positively to the development of more realistic finite element models. Use of complex finite element codes based on computational mechanics principles allowed the virtual reproduction of real world problems. Regarding roadside safety, the design phase was, until now, based on the use of simplified analysis, unable to describe accurately the complexity of vehicle impacts against safety hardware. Modeling details, such as geometry, constitutive laws of the materials, rigid, kinematic and other links between bodies, definition and characterization of contact surfaces are necessary to build an accurate finite element model for an impact problem. This set of information is needed for each different body involved in the event; making the development of a complete model very much demanding. Once a part (subset) of the entire model has been accurately validated against real experimental data, it can be used again and again in other analogous models.
  • Küçük Resim
    Öğe
    Development of a 30,000 kg heavy goods vehicle for LS-DYNA applications
    (Inderscience Enterprises Ltd, 2007) Atahan, Ali Osman; Bonin, Guido; Karacasu, Murat
    In this paper, a finite element model of a 30,000 kg Heavy Goods Vehicle (HGV) was developed and validated against full-scale crash test data. Since this vehicle is a standard test vehicle in the European crash test standards, EN1317, development of an accurate vehicle model was deemed to be a positive contribution to the evaluation of roadside safety hardware. The vehicle model reproduces a FIAT-IVECO F 180 truck, a vehicle with four axles and a mass of 30,000 kg when fully loaded. The model consisted of 12,337 elements and 11,470 nodes and was built for and is ready to use with LS-DYNA finite element code from Livermore Software Technology Corporation. Data available from two previously performed full-scale crash tests, one on a steel bridge rail and the other on a portable concrete barrier, were used to validate the accuracy of the HGV model. Results of the finite element simulation study show that the developed HGV model shows promise and can accurately replicate the behaviour of an actual HGV in a full-scale crash test. Improvements such as the steering mechanism in the front axles and the suspension system are currently underway to make model more realistic.
  • [ N/A ]
    Öğe
    Development of a draft heavy vehicle rear underride guard specification
    (American Society of Mechanical Engineers (ASME), 2006) Atahan, Ali O.; El-Gindy, Moustafa; Bonin, Guido; Allen, James
    This paper summarizes results of a large research program intended to develop a draft rear underride guard specification for heavy vehicles. Results of a series of laboratory and full-scale crash tests performed at the Transport Canada Research Center were used in the development of these specifications. A total of eleven full-scale crash tests was carried out to evaluate the effectiveness of different underride guards. The first ten of these tests were performed on a simulated trailer attached guard. Four different underride guard designs were used in these ten full-scale crash tests. Three different vehicle models traveling at 48, 56 and 65 km/h speeds were used to impact underride guards head on. Results of the first ten crash tests show that the currently used US FMVSS 223 standard is far from adequate in preventing the occurrance of rear underride. Based on findings obtained from these crash tests, an improved guard design was developed and tested using a 16-meter trailer. This final crash test verified the effectiveness of improved guard design in reducing the undesirable effects of rear underride crashes. Based on the results, a draft heavy vehicle rear underride guard specification was developed. Copyright © 2006 by ASME.
  • Küçük Resim
    Öğe
    Development of European End-Treatment TWINY Using Simulation and Crash Testing
    (Asce-Amer Soc Civil Engineers, 2008) Atahan, Ali O.; Bonin, Guido; Cicinnati, Luigi; Yasarer, Hakan I.
    In this study, a simple guardrail end treatment, called TWINY, designed particularly for use with a thrie-beam guardrail system is developed. In the first phase, the system is designed and analyzed using a versatile, highly nonlinear finite-element analysis program LS-DYNA. Two different crashes involving a head on impact and a 15 S angle impact are simulated using LS-DYNA. In both simulations, a nominal 900 kg car traveling at 80 km/h is used to impact the end treatment as outlined in European Crash Testing Guidelines EN1317 section 4. Based on the successful simulation results, both tests are repeated in a crash test facility in Germany to substantiate simulation predictions. Full-scale crash testing results compared favorably with those obtained from LS-DYNA simulation. Based on the results, a final full-scale crash testing was carried out on the system to fully verify its compliance with the EN1317 section 4. A 1,300 kg compact car traveling at 80 km/ h impacted the end terminal at its midlength at an angle of 15 S. The vehicle is successfully redirected with minimal damage to both vehicle and terminal. Based on the simulation and full-scale crash test results, it can be concluded that TWINY is a promising end treatment for steel thrie-beam guardrail terminals and can be implemented at the European Highway System with confidence.
  • [ N/A ]
    Öğe
    EVALUATION OF VERTICAL WALL-TO-GUARDRAIL TRANSITION
    (Amer Soc Mechanical Engineers, 2009) Atahan, Ali O.; Bonin, Guido; El-Gindy, Moustafa
    Transition barriers are used to connect longitudinal barriers that have different stiffnesses. They are designed to provide a gradual increase in stiffness towards the stiffer barrier section. In this study, a W-beam rail and a W-beam rubrail transition connecting a rigid bridge rail to a semi-rigid guardrail was evaluated using numerical and experimental methods. First, a finite element model of the transition design was constructed and validated using a 2000 kg pickup truck impact. Then, a series of vehicle models, i.e., 900 kg compact automobile, 8000 kg single unit truck and finally 30,000 kg heavy truck was used to evaluate the impact performance of the same transition design numerically. Simulation results predict that the double W-beam transition barrier performs acceptably in containing and redirecting all vehicles except 30,000 kg heavy truck. Occupant injury criteria were also found to be acceptable for all the cases, except 30,000 kg truck impact. Performing further simulations with vehicle sizes heavier than 8,000 kg that exist in crash testing guidelines is recommended to evaluate the acceptability limit of existing W-beam rail and a W-beam rubrail transition.
  • [ N/A ]
    Öğe
    Evaluation of vertical wall-to-guardrail transition
    (2008) Atahan, Ali O.; Bonin, Guido; El-Gindy, Moustafa
    Transition barriers are used to connect longitudinal barriers that have different stiffnesses. They are designed to provide a gradual increase in stiffness towards the stiffer barrier section. In this study, a W-beam rail and a W-beam rubrail transition connecting a rigid bridge rail to a semi-rigid guardrail was evaluated using numerical and experimental methods. First, a finite element model of the transition design was constructed and validated using a 2000 kg pickup truck impact. Then, a series of vehicle models, i.e., 900 kg compact automobile, 8000 kg single unit truck and finally 30,000 kg heavy truck was used to evaluate the impact performance of the same transition design numerically. Simulation results predict that the double W-beam transition barrier performs acceptably in containing and redirecting all vehicles except 30,000 kg heavy truck. Occupant injury criteria were also found to be acceptable for all the cases, except 30,000 kg truck impact. Performing further simulations with vehicle sizes heavier than 8,000 kg that exist in crash testing guidelines is recommended to evaluate the acceptability limit of existing W-beam rail and a W-beam rubrail transition. Copyright © 2008 by ASME.
  • Küçük Resim
    Öğe
    Numerical analysis of an H4a heavy containment level transition
    (Inderscience Enterprises Ltd, 2006) Atahan, Ali Osman; Bonin, Guido
    It is fact that European highway safety personnel are not aware of the significance of transition barriers. As a result, most countries do not use transition designs on their highways. On the other hand, the ones that are currently in use lack adequate detailing and do not provide the required level of protection during a collision event. In this paper, the impact performance of a standard US flared-back guardrail-to-bridge rail transition is evaluated using a 30,000 kg heavy goods vehicle according to European EN1317 test TB71 requirements. A highly acceptable and versatile non-linear finite element code, LS-DYNA, is used for the analysis. Simulation results show that the transition fails to contain the vehicle. The vehicle overrides the transition due to insufficient rail height. To upgrade the impact performance of the transition to H4a, high containment level, an additional rail element was added to the current design to increase the rail height from 8 10 mm to 1050 mm. Subsequent simulation results show that the modified transition design meets the EN1317 test TB71 requirements. It is therefore recommended that the current US standard flared back guardrail-to-bridge rail transition design should have a minimum of 1050 mm rail height to satisfy European crash testing guidelines for H4a, heavy containment level transition.
  • Küçük Resim
    Öğe
    Retrofit of an existing Italian bridge rail for H4a containment level using simulation
    (Inderscience Enterprises Ltd, 2009) Bonin, Guido; Cantisani, Giuseppe; Ranzo, Alessandro; Loprencipe, Giuseppe; Atahan, Ali O.
    This paper describes the methodology for the development of a crashworthy heavy containment bridge rail for the Italian Highway System. The current design was determined to be inadequate for heavy vehicle containment and could not be demolished due to damage risk to bridge superstructure. Italian Highway Agency has decided to retrofit the current design. Two different bridge rail models are developed and analysed using 30 ton heavy vehicle according to European EN1317 Test TB71 requirements. Detailed finite element analyses are performed to evaluate the acceptability of retrofit alternatives. A versatile, highly non-linear and widely accepted finite element program LS-DYNA is used to simulate the crash events. Analysis results show that the final bridge rail model successfully contains and redirects the 30 ton vehicle and it is found to be an acceptable retrofit to existing bridge rail design. A full-scale crash test is recommended to substantiate simulation findings.