Microstructure, hardness and high temperature wear characteristics of boronized Monel 400

Basit Öğe Kaydı
dc.authoridDoleker, Kadir Mert/0000-0003-4057-6832
dc.authoridDAL, SERKAN/0000-0002-0197-7943
dc.contributor.authorKucuk, Yilmaz
dc.contributor.authorDoleker, K. Mert
dc.contributor.authorGok, M. Sabri
dc.contributor.authorDal, Serkan
dc.contributor.authorAltinay, Yasemin
dc.contributor.authorErdogan, Azmi
dc.date.accessioned2024-09-18T20:32:56Z
dc.date.available2024-09-18T20:32:56Z
dc.date.issued2022
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractBoronizing processes were carried out at 900 degrees C, 950 degrees C and 1000 degrees C for 2, 4 and 6 h to improve the wear performance of Monel 400 alloy. According to microstructure analyses and nanoindentation tests, Ni2B, FeNiB and FeB phases were detected as dominant phases in the boronized layer. Apart from this, it was observed that the amount of Cu deposits in the boronized layers increased depending on the increasing boronizing temperature. After the boronizing process, the boride layer thickness and hardness values were found to be in the range of 32-272 mu m and 12.76-17.83 GPa, respectively. From the results of dry sliding wear test, the wear volume loss values of the boronized Monel 400 alloy decreased by approximately 25 times compared to the untreated samples. The lowest volume loss value among all test samples was observed in the boronized sample at 950 degrees C for 4 h. In addition to the hardness value, it was determined that the morphology and mechanical properties of the boronized layer were also effective on the wear results. Plastic deformation, delamination and oxidation type wear mechanisms were observed as the dominant wear mechanisms in the room and high temperature tests of boronized samples.en_US
dc.identifier.doi10.1016/j.surfcoat.2022.128277
dc.identifier.issn0257-8972
dc.identifier.issn1879-3347
dc.identifier.scopus2-s2.0-85125492688en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.urihttps://doi.org/10.1016/j.surfcoat.2022.128277
dc.identifier.urihttps://hdl.handle.net/20.500.12483/11218
dc.identifier.volume436en_US
dc.identifier.wosWOS:000779415800006en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofSurface & Coatings Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMonel 400en_US
dc.subjectBoronizingen_US
dc.subjectHigh temperatureen_US
dc.subjectNanoindentationen_US
dc.subjectWearen_US
dc.titleMicrostructure, hardness and high temperature wear characteristics of boronized Monel 400en_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
Tam Metin / Full Text
Boyut:
3.67 MB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu