Numerical thickness optimization study of CIGS based solar cells with wxAMPS

Basit Öğe Kaydı
dc.authoridKahraman, suleyman/0000-0002-7730-6353
dc.authoridCetinkaya, Samed/0000-0002-7476-9467
dc.contributor.authorYasar, S.
dc.contributor.authorKahraman, S.
dc.contributor.authorCetinkaya, S.
dc.contributor.authorApaydin, S.
dc.contributor.authorBilican, I.
dc.contributor.authorUluer, I.
dc.date.accessioned2024-09-18T20:11:26Z
dc.date.available2024-09-18T20:11:26Z
dc.date.issued2016
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractIn this paper, a numerical investigation of the effects of thickness of absorber and buffer layers for a typical CIGS based solar cell was carried out for the first time, employing the wxAMPS software which is a new custom-designed software package for solar cell simulation. We have examined how the output parameters change with absorber and buffer thicknesses and suggested four different cell structures. By using the baseline structure, an optimum band gap value of 1.4 eV was determined for the CIGS absorber layer prior to do thickness study. Optimum absorber thickness value has been determined as 2500 nm from the simulation results. Spectral response of the cell decreased with increasing thickness in blue region. The influence of buffer layer thickness was investigated and it was found that most of the photo-generated carriers are collected by a thinner CdS layer. A significant decrease in current density, open circuit voltage and conversion efficiency occurred with increasing buffer layer thickness. This behavior was attributed to a decrease in the number of collected carriers due to the recombination of electron-hole pairs proceeded from the absorbed photons in the CdS bulk for large thickness. As a result, efficiencies around 27% were obtained through optimization while that of baseline structure was 25%. Our results have shown that the suggested structures both produce higher efficiencies than that of baseline structure and may lead to produce more efficient CIGS-based thin film solar cells. (C) 2016 Elsevier GmbH. All rights reserved.en_US
dc.description.sponsorshipScientific Research Commission of Mustafa Kemal University [12661]en_US
dc.description.sponsorshipThe authors thank to the original developer of wxAMPS, Dr. Y Liu in Nankai University, for valuable discussions, and Dr. Fonash's group at Pennsylvania State University (PSU) which they first developed AMPS-1D. A great appreciate is sent to Golden Software, LLC. This study is conducted with support of Scientific Research Commission of Mustafa Kemal University (Project No: 12661).en_US
dc.identifier.doi10.1016/j.ijleo.2016.06.094
dc.identifier.endpage8835en_US
dc.identifier.issn0030-4026
dc.identifier.issue20en_US
dc.identifier.scopus2-s2.0-84977646444en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage8827en_US
dc.identifier.urihttps://doi.org/10.1016/j.ijleo.2016.06.094
dc.identifier.urihttps://hdl.handle.net/20.500.12483/8847
dc.identifier.volume127en_US
dc.identifier.wosWOS:000389102500082en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Gmbhen_US
dc.relation.ispartofOptiken_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCIGSen_US
dc.subjectSolar cellen_US
dc.subjectQuantum efficiencyen_US
dc.subjectwxAMPSen_US
dc.subjectNumerical studyen_US
dc.titleNumerical thickness optimization study of CIGS based solar cells with wxAMPSen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
8847.pdf
Boyut:
1.26 MB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu