Effect of Sodium Hypochlorite and EDTA on Surface Roughness of HyFlex CM and HyFlex EDM Files

Basit Öğe Kaydı
dc.authoridozyurek, taha/0000-0003-3299-3361
dc.contributor.authorUslu, Gulsah
dc.contributor.authorOzyurek, Taha
dc.contributor.authorYilmaz, Koray
dc.date.accessioned2024-09-18T20:19:54Z
dc.date.available2024-09-18T20:19:54Z
dc.date.issued2018
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractThe aim of the present study was to compare the effect of exposure to sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA) on the surface topography and roughness of HyFlex controlled memory (CM) and HyFlex electrical discharge machining (EDM) using atomic force microscopy (AFM). Twenty HyFlex EDM (25/.08) and 20 HyFlex CM (25/.06) files were divided into five groups (n = 4). One group served as a negative control group. The files in the other groups were exposed to 5.25% NaOCl and 17% EDTA solutions at 37 degrees C for 5 and 10 min, respectively, and examined using AFM after each exposure. The data were analyzed using one-way ANOVA test. The lowest values were observed in the control group of HyFlex EDM files (p < .05). The highest values were observed in the HyFlex EDM and HyFlex CM files immersed in EDTA for 10 min (p < .05). In conclusion, the tested irrigants had a significant negative effect on the surface porosity of NiTi files. The immersion of NiTi files in irrigants during cleaning and sterilization procedures results in corrosion and surface deformation of the files, and this can lead to unexpected file fracture during clinical use. Thus, the investigation of effect of ethylenediaminetetraacetic acid (EDTA) and sodium hypochlorite (NaOCl) on surface topography of HyFlex files is important.en_US
dc.identifier.doi10.1002/jemt.23098
dc.identifier.endpage1411en_US
dc.identifier.issn1059-910X
dc.identifier.issn1097-0029
dc.identifier.issue12en_US
dc.identifier.pmid30351507en_US
dc.identifier.scopus2-s2.0-85055497014en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1406en_US
dc.identifier.urihttps://doi.org/10.1002/jemt.23098
dc.identifier.urihttps://hdl.handle.net/20.500.12483/9942
dc.identifier.volume81en_US
dc.identifier.wosWOS:000453871900006en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.language.isoenen_US
dc.publisherWileyen_US
dc.relation.ispartofMicroscopy Research and Techniqueen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectethylenediaminetetraacetic aciden_US
dc.subjectHyFlex CMen_US
dc.subjectHyFlex EDMen_US
dc.subjectsodium hypohloriteen_US
dc.subjectsurface roughnessen_US
dc.titleEffect of Sodium Hypochlorite and EDTA on Surface Roughness of HyFlex CM and HyFlex EDM Filesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
Tam Metin / Full Text
Boyut:
1001.24 KB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu