Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints

Basit Öğe Kaydı
dc.authoridCam, Gurel/0000-0003-0222-9274
dc.contributor.authorBozkurt, Y.
dc.contributor.authorSalman, S.
dc.contributor.authorCam, G.
dc.date.accessioned2024-09-18T20:29:47Z
dc.date.available2024-09-18T20:29:47Z
dc.date.issued2013
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractIn this study, the effect of weld parameters on mechanical properties, such as lap shear fracture load, of friction stir spot welded dissimilar lap joints was studied. The effects of the plate positioning, the plunge depth and the dwell time as well as the tool tilt angle on the joint strength were investigated. The experimental results showed that the positioning of the sheets played an important role on the strength of the joints. The joint strength was higher when AA 5754 sheet is placed on the top, whereas lower strength values were displayed by dissimilar joints produced by placing AA 2024 as the upper sheet. It was also observed that the plunge depth, dwell time and tool tilt angle had a strong effect on the failure mode of the friction stir spot welded lap joints produced. The joints exhibited two different fracture modes, namely cross and pullout nugget under lap shear tensile testing conditions.en_US
dc.description.sponsorshipMarmara University Scientific Research Fund (BAPKO) [FEN-B-060510-0133]en_US
dc.description.sponsorshipThe authors are deeply grateful for the financial support of Marmara University Scientific Research Fund (BAPKO) (grant no. FEN-B-060510-0133).en_US
dc.identifier.doi10.1179/1362171813Y.0000000111
dc.identifier.endpage345en_US
dc.identifier.issn1362-1718
dc.identifier.issn1743-2936
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-84875921810en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage337en_US
dc.identifier.urihttps://doi.org/10.1179/1362171813Y.0000000111
dc.identifier.urihttps://hdl.handle.net/20.500.12483/11057
dc.identifier.volume18en_US
dc.identifier.wosWOS:000317349400010en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofScience and Technology of Welding and Joiningen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMechanical characterisationen_US
dc.subjectFriction stir spot weldingen_US
dc.subjectAluminium alloysen_US
dc.subjectFailureen_US
dc.titleEffect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 jointsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
Tam Metin / Full Text
Boyut:
609.77 KB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu