Modelling and experimental verification of the operating current of mono-crystalline photovoltaic modules using four- and five-parameter models

Basit Öğe Kaydı
dc.contributor.authorCelik, Ali Naci
dc.contributor.authorAcikgoz, Nasir
dc.date.accessioned2024-09-18T20:54:13Z
dc.date.available2024-09-18T20:54:13Z
dc.date.issued2007
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractThis article presents the modelling and experimental verification of the operating current of a 120 W of mono-crystalline photovoltaic module using four- and five-parameter analytical models. The southern part of Turkey, where the experimental system is mounted, is particularly well suited to photovoltaic installations. The operating current of the photovoltaic module, calculated from the models, is validated based on a series of experimental measurements. As well as the current and voltage of the photovoltaic module, the environmental variables such as ambient temperature and solar irradiance were measured and used for validation of the operating current. The photovoltaic cell models considered in this article are drawn from the equivalent electrical circuit that includes light-generated current, diode reverse saturation current, and series and shunt resistances. The simplified four-parameter model assumes the shunt resistance as infinite and thus neglects it. After determining the model parameters, the operating current is calculated using both models and compared to the measured current produced by the photovoltaic module. It is shown that the complete five-parameter model predicts the operating current better than the simplified four-parameter model, especially around solar noon, when most of the power is produced. (c) 2006 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.apenergy.2006.04.007
dc.identifier.endpage15en_US
dc.identifier.issn0306-2619
dc.identifier.issn1872-9118
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-33749242233en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1en_US
dc.identifier.urihttps://doi.org/10.1016/j.apenergy.2006.04.007
dc.identifier.urihttps://hdl.handle.net/20.500.12483/11680
dc.identifier.volume84en_US
dc.identifier.wosWOS:000241538500001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofApplied Energyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectphotovoltaic cell modelsen_US
dc.subjectfour and five-parameter photovoltaic cell modelsen_US
dc.subjectcalculation of operating photovoltaic currenten_US
dc.titleModelling and experimental verification of the operating current of mono-crystalline photovoltaic modules using four- and five-parameter modelsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
Tam Metin / Full Text
Boyut:
370.66 KB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu