Investigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper Conditions

Basit Öğe Kaydı
dc.authoridCam, Gurel/0000-0003-0222-9274
dc.contributor.authorIpekoglu, Guven
dc.contributor.authorErim, Secil
dc.contributor.authorCam, Gurel
dc.date.accessioned2024-09-18T21:02:58Z
dc.date.available2024-09-18T21:02:58Z
dc.date.issued2014
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractIn this study, the effect of post-weld heat treatment (PWHT) on the microstructure and mechanical properties of friction stir butt-joined AA6061 Al-alloy plates both in O and T6-temper conditions was investigated by detailed microstructural investigations and micro-hardness measurements, in combination with transverse tensile testing. It was determined that the PWHT might result in abnormal grain growth (AGG) in the weld zone particularly in the joints produced in O-temper condition depending on the weld parameters used during friction stir welding. The PWHT generally led to an improvement in the mechanical properties even if AGG took place. Thus, the post-weld heat-treated joints exhibited mechanical properties much higher than those of respective as-welded plates and comparable to those of the respective base plates. (C) The Minerals, Metals & Materials Society and ASM International 2013en_US
dc.description.sponsorshipScientific Research Projects Unit of Dokuz Eylul University, Izmir, Turkey [DEU 2007.KB.FEN.52]en_US
dc.description.sponsorshipThe authors would like to express their gratitude to the Scientific Research Projects Unit of Dokuz Eylul University, Izmir, Turkey, for financing this work partially (The project number: DEU 2007.KB.FEN.52). The authors would also like to thank Assoc. Prof. Dr. B. Goren Kiral for her contribution to the conduction of the project. Thanks are also due to Assoc. Prof. Dr. Yahya Bozkurt and Dr. Mustafa Ilhan from Marmara University for his help with SEM investigations and Dr. Caner Tasan and Mr. Cihan Buyukbayram from FNSS for their help in the conduction of residual stress measurements.en_US
dc.identifier.doi10.1007/s11661-013-2026-y
dc.identifier.endpage877en_US
dc.identifier.issn1073-5623
dc.identifier.issn1543-1940
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84896768691en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage864en_US
dc.identifier.urihttps://doi.org/10.1007/s11661-013-2026-y
dc.identifier.urihttps://hdl.handle.net/20.500.12483/13176
dc.identifier.volume45Aen_US
dc.identifier.wosWOS:000331094100031en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofMetallurgical and Materials Transactions A-Physical Metallurgy and Materials Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectZn-Mg Alloyen_US
dc.subjectMechanical-Propertiesen_US
dc.subjectMicrostructureen_US
dc.subjectLaseren_US
dc.subjectParametersen_US
dc.subjectJointsen_US
dc.subjectDeformationen_US
dc.subjectWeldabilityen_US
dc.subjectToolen_US
dc.titleInvestigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper Conditionsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
Tam Metin / Full Text
Boyut:
1.99 MB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu