Compressive strength, abrasion resistance and energy absorption capacity of rubberized concretes with and without slag

Yükleniyor...
Küçük Resim

Tarih

2011

Dergi Başlığı

Dergi ISSN

Cilt Başlığı

Yayıncı

Springer

Erişim Hakkı

info:eu-repo/semantics/closedAccess

Özet

It has been estimated that around one billion tires are withdrawn from use in the world every year. Therefore, the development of new techniques for recycling waste tires is necessary. A number of innovative solutions that meet the challenge of the tire disposal problem involve using waste as an additive to cement-based materials. In this study, an experimental program was carried out to determine the compressive strength, abrasion resistance, and energy absorption capacity of rubberized concretes with and without ground granulated blast furnace slag (GGBFS). For this purpose, a water-binder ratio (0.4), four designated levels of crumb rubber (CR) contents (0, 5, 15 and 25% by fine aggregate volume), and three levels of GGBFS content (0, 20, and 40%) were considered as experimental parameters. In total, 12 concrete mixtures were cast and tested for compressive strength, abrasion resistance, and energy absorption capacity. Test results indicate that using CR aggregate decreases compressive strength and abrasion resistance of the concretes, but increases energy absorption capacity significantly.

Açıklama

Anahtar Kelimeler

Waste rubber, Blast furnace slag, Abrasion resistance, Energy absorption

Kaynak

Materials and Structures

WoS Q Değeri

Q1

Scopus Q Değeri

Q1

Cilt

44

Sayı

7

Künye