Effect of Lanthanum on mechanical and wear properties of high-pressure die-cast Mg-3Al-3Sn-3Sb alloy

Basit Öğe Kaydı
dc.contributor.authorYarkadas, Guven
dc.contributor.authorKumruoglu, Levent Cenk
dc.contributor.authorOzarslan, Selma
dc.contributor.authorSevik, Huseyin
dc.date.accessioned2024-09-18T20:29:40Z
dc.date.available2024-09-18T20:29:40Z
dc.date.issued2021
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractIn the present study, the effect of an La alloying element with different quantities (1, 3 and 5 wt.-%) on the microstructure, mechanical and dry sliding wear properties of Mg-3Al-3Sn-3Sb alloy was investigated. The wear tests were done on the alloys using pin on-disk equipment against a 4140 steel disc as counterpart under three different sliding velocities of 0.3, 0.6 and 1.2 ms(-1) and four different loads of 5, 10, 20 and 40 N. The microstructural results showed that the new intermetallic phases (La5Sn3 and LaSnSb2) were formed with addition of La to the main alloy. Also, it was observed that the hardness of the Mg-3Al-3Sn-3Sb alloy was raised with increasing La addition. Furthermore, the tensile properties of the Mg-3Al-3Sn-3Sb alloy improved with rising La content at room and elevated temperature. The wear rates of the alloys increase with increasing of the sliding speed and load. In addition to this, the wear rate of the Mg-3Al-3Sn-3Sb alloy was found to be higher than that of the La content alloys for all test conditions.en_US
dc.identifier.doi10.1515/mt-2020-0012
dc.identifier.endpage91en_US
dc.identifier.issn0025-5300
dc.identifier.issn2195-8572
dc.identifier.issue1en_US
dc.identifier.startpage85en_US
dc.identifier.urihttps://doi.org/10.1515/mt-2020-0012
dc.identifier.urihttps://hdl.handle.net/20.500.12483/11003
dc.identifier.volume63en_US
dc.identifier.wosWOS:000636792600013en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherWalter De Gruyter Gmbhen_US
dc.relation.ispartofMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMagnesium alloyen_US
dc.subjectrare-earth element (La)en_US
dc.subjectmechanical propertiesen_US
dc.subjectwear testingen_US
dc.titleEffect of Lanthanum on mechanical and wear properties of high-pressure die-cast Mg-3Al-3Sn-3Sb alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu