Friction and wear behaviour of borided AISI 304 stainless steel with nano particle and micro particle size of boriding agents

Basit Öğe Kaydı
dc.authorscopusid55762100600
dc.authorscopusid9333076800
dc.authorscopusid32367668800
dc.authorscopusid36927313300
dc.authorscopusid6603490551
dc.contributor.authorGunen, A.
dc.contributor.authorUlutan, M.
dc.contributor.authorGok, M.S.
dc.contributor.authorKurt, B.
dc.contributor.authorOrhan, N.
dc.date.accessioned2024-09-19T15:45:21Z
dc.date.available2024-09-19T15:45:21Z
dc.date.issued2014
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractIn this study, AISI 304 stainless steel was subjected to solid boriding treatmentwith 10-50 nm particle size Nanoboron and commercially EKabor 3 powders.Processes were carried out at temperatures of 1223 and 1273 K for 2 and 4 hof treatment. Friction and wear behaviour of the samples borided with differentsizes of boriding agents has been examined. Wear experiments were performedby reciprocating a sliding wear test at dry conditions. After the wear tests, weartrack area, wear track volume and wear rate were calculated based on the surfaceof the worn materials. The samples borided with EKabor 3 and Nanoboronpowder showed 5 and 8 times higher wear resistance than non-borided AISI 304stainless steel, respectively. Borided steel samples were characterised by opticalmicroscopy, scanning electron microscopy (SEM), microhardness and X-ray diffractionanalyses (XRD). Metallographic studies showed that the boride layershave a flat and smooth morphology both in the AISI 304 steel and the boronpowder. The thickness and hardness of the boride layer measured between theranges of 23-33 ?m in thickness, 1020-1264 HV0.01 for EKabor 3 and 49-67 ?m,1880-2200 HV0.01 for boron nano-particles, depend on the boriding time and temperature.en_US
dc.identifier.endpage379en_US
dc.identifier.issn1310-4772
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-84948436498en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage362en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12483/14598
dc.identifier.volume20en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherScibulcom Ltd.en_US
dc.relation.ispartofJournal of the Balkan Tribological Associationen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBoridingen_US
dc.subjectFrictionen_US
dc.subjectNanoboronen_US
dc.subjectReciprocating slidingen_US
dc.subjectWearen_US
dc.titleFriction and wear behaviour of borided AISI 304 stainless steel with nano particle and micro particle size of boriding agentsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu