The influence of aggregate type on the strength and abrasion resistance of high strength concrete

Basit Öğe Kaydı
dc.authoridTeymen, Ahmet/0000-0001-7952-1025
dc.authoridAtis, Cengiz Duran/0000-0003-3459-329X
dc.contributor.authorKilic, A.
dc.contributor.authorAtis, C. D.
dc.contributor.authorTeymen, A.
dc.contributor.authorKarahan, O.
dc.contributor.authorOzcan, F.
dc.contributor.authorBilim, C.
dc.contributor.authorOzdemir, M.
dc.date.accessioned2024-09-18T19:52:30Z
dc.date.available2024-09-18T19:52:30Z
dc.date.issued2008
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractThis paper examines the influence of aggregate type on the strength characteristics and abrasion resistance of high strength silica fume concrete. Five different aggregate types (gabbro, basalt, quartsite, limestone and sandstone) were used to produce high strength concrete containing silica fume. Silica fume replacement ratio with cement was 15% on a mass basis. Water-binder ratio was 0.35. The amount of hyperplasticizer was 4% of the binder content by mass. Gabbro concrete showed the highest compressive and flexural tensile strength and abrasion resistance, while sandstone showed the lowest compressive and flexural tensile strength and abrasion resistance. High abrasion resistant aggregate produced a concrete with high abrasion resistance. Three-month compressive strengths of concretes made with basalt, limestone and sandstone were found to be equivalent to the uniaxial compressive strengths of their aggregate rocks. However, the concretes made with quartsite and gabbro aggregate showed lower compressive strength than the uniaxial compressive strength of their aggregate rocks. (c) 2007 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.cemconcomp.2007.05.011
dc.identifier.endpage296en_US
dc.identifier.issn0958-9465
dc.identifier.issn1873-393X
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-39449120510en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage290en_US
dc.identifier.urihttps://doi.org/10.1016/j.cemconcomp.2007.05.011
dc.identifier.urihttps://hdl.handle.net/20.500.12483/7468
dc.identifier.volume30en_US
dc.identifier.wosWOS:000255086900005en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofCement & Concrete Compositesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectaggregate typesen_US
dc.subjectconcreteen_US
dc.subjectstrengthen_US
dc.subjectabrasionen_US
dc.titleThe influence of aggregate type on the strength and abrasion resistance of high strength concreteen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
7468.pdf
Boyut:
157.88 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu