Microstructure, mechanical and corrosion properties of novel Mg-Sn-Ce alloys produced by high pressure die casting

Basit Öğe Kaydı
dc.authoridSORAR, IDRIS/0000-0002-1082-7576
dc.contributor.authorOzarslan, Selma
dc.contributor.authorSevik, Huseyin
dc.contributor.authorSorar, Idris
dc.date.accessioned2024-09-18T20:04:26Z
dc.date.available2024-09-18T20:04:26Z
dc.date.issued2019
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractThe aim of this study was to investigate the effect of adding 1, 2 and 4% wt of cerium on the microstructure, mechanical and corrosion properties of high pressure die casting (HPDC) Mg-4Sn alloys. Microstructure analyses of the alloys were carried out using X-Ray Diffraction (XRD) and Scanning Electron microscopy (SEM). The corrosion behaviors were determined with the potentiodynamic polarization and immersion tests in Hanks Balanced Salt Solution (HBSS), which is used as the artificial body fluid. The microstructural results showed that the addition of Ce to the main alloy creates new intermetallic phases (Ce5Sn4 and MgSnCe). In addition, Ce addition provided effectively the grain refinement of the alloys. While the hardness and yield strength of the Mg-4Sn alloy enhanced continuously with increasing Ce content, the tensile strength and elongation reached up to 2% wt. The corrosion resistance of the main alloy was improved by the addition of 1% wt of Ce. However, the Ce content, which is more than 1% wt decreased corrosion resistance.en_US
dc.description.sponsorshipHatay Mustafa Kemal University Scientific Research Projects Department [16544]en_US
dc.description.sponsorshipThis research was supported by Hatay Mustafa Kemal University Scientific Research Projects Department. Project No: 16544.en_US
dc.identifier.doi10.1016/j.msec.2019.110064
dc.identifier.issn0928-4931
dc.identifier.issn1873-0191
dc.identifier.pmid31546403en_US
dc.identifier.scopus2-s2.0-85071658336en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.urihttps://doi.org/10.1016/j.msec.2019.110064
dc.identifier.urihttps://hdl.handle.net/20.500.12483/8174
dc.identifier.volume105en_US
dc.identifier.wosWOS:000490044700119en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.relation.ispartofMaterials Science and Engineering C-Materials For Biological Applicationsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBiodegradable magnesium alloysen_US
dc.subjectMicrostructureen_US
dc.subjectMechanical propertiesen_US
dc.subjectCorrosion propertiesen_US
dc.subjectBiomaterialsen_US
dc.titleMicrostructure, mechanical and corrosion properties of novel Mg-Sn-Ce alloys produced by high pressure die castingen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
Tam Metin / Full text
Boyut:
1.61 MB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu