The effect of weld parameters on friction stir welding of brass plates

Basit Öğe Kaydı
dc.authoridYAVUZ, Hakan/0000-0002-6166-0921
dc.authoridMISTIKOGLU, SELCUK/0000-0003-2985-8310
dc.authoridCam, Gurel/0000-0003-0222-9274
dc.contributor.authorCam, G.
dc.contributor.authorSerindag, H. T.
dc.contributor.authorCakan, A.
dc.contributor.authorMistikoglu, S.
dc.contributor.authorYavuz, H.
dc.date.accessioned2024-09-18T20:28:13Z
dc.date.available2024-09-18T20:28:13Z
dc.date.issued2008
dc.departmentHatay Mustafa Kemal Üniversitesien_US
dc.description.abstractMore successful results have been obtained in butt- and overlap-joining of Al-alloy plates by a recently developed solid state joining technique, namely friction stir welding (FSW), than in more conventional fusion welding processes. In this joining technique, no fusion takes place in the joint area of the plates welded. This novel joining method also offers the potential to weld some other materials rather than Al-alloys, such as Mg-alloys, brasses and low strength steels. In this study, the applicability of friction stir welding to brasses, namely 90%Cu-10%Zn and 70%Cu-30%Zn alloys, has been investigated. The joint performance was determined by conducting optical microscopy, microhardness mesurements and mechanical testing (e.g. tensile and bend tests). The effect of welding speed on the joint quality at a given rotational speed of the stirring pin (i.e. 1600 rpm) was also determined for both alloys. The highest joint performances were obtained at a welding speed of 210 mm/min for both alloys.en_US
dc.identifier.doi10.1002/mawe.200800314
dc.identifier.endpage399en_US
dc.identifier.issn0933-5137
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-55349117128en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage394en_US
dc.identifier.urihttps://doi.org/10.1002/mawe.200800314
dc.identifier.urihttps://hdl.handle.net/20.500.12483/10793
dc.identifier.volume39en_US
dc.identifier.wosWOS:000256983500004en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWiley-V C H Verlag Gmbhen_US
dc.relation.ispartofMaterialwissenschaft Und Werkstofftechniken_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectjoiningen_US
dc.subjectfriction stir weldingen_US
dc.subjectbrassen_US
dc.subjectAl-alloysen_US
dc.subjectjoint performanceen_US
dc.titleThe effect of weld parameters on friction stir welding of brass platesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
[ N/A ]
İsim:
Tam Metin / Full Text
Boyut:
261.2 KB
Biçim:
Adobe Portable Document Format
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu