Characterisation of ZnO nanorod arrays grown by a low temperature hydrothermal method
Yükleniyor...
Dosyalar
Tarih
2012
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Taylor & Francis Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this paper, growth steps of well defined ZnO nanorod arrays deposited on seeded substrates were investigated. To obtain ZnO seed layer on glass substrates, a successive ionic layer adsorption and reaction (SILAR) method was used and then ZnO nanorods were grown on seed layer using a chemical bath deposition (CBD) method. The effects of seed layer and deposition time on morphology, crystallographic structure (e.g. grain size, microstrain and dislocation density) and electrical characteristics of ZnO nanorods were studied. From the SEM micrographs, it could be seen that the ZnO nanorods densely covered the substrate and were nearly perpendicular to the substrate surface. The XRD patterns showed that the ZnO nanorod arrays had a hexagonal wurtzite structure with a preferred orientation along the (002) plane. An increase in deposition time resulted in an increase in the intensity of the preferred orientation and grain size, but a decrease in microstrain and dislocation density. Electrical activation energies of the structures were calculated as 0.15-0.85 eV from current-temperature characteristics. It was concluded that the morphologies of the structures obtained in this study via a simple and fast solution method can provide high surface areas which are important in area-dependent applications, such as solar cells, hydrogen conversion devices, sensors, etc.
Açıklama
Anahtar Kelimeler
nanorod, chemical bath deposition, XRD, microstrain, dislocation density
Kaynak
Philosophical Magazine
WoS Q Değeri
Q1
Scopus Q Değeri
Q3
Cilt
92
Sayı
17
