Poly(o-anisidine) on brass
dc.contributor.author | Ozyilmaz, Ali Tuncay | |
dc.contributor.author | Ozyilmaz, Gul | |
dc.contributor.author | Yilmaz, Ercan | |
dc.contributor.author | Colak, Nureddin | |
dc.date.accessioned | 2024-09-18T20:11:33Z | |
dc.date.available | 2024-09-18T20:11:33Z | |
dc.date.issued | 2008 | |
dc.department | Hatay Mustafa Kemal Üniversitesi | en_US |
dc.description.abstract | The electrochemical synthesis of poly(o-anisidine) (POA) was achieved on brass (CuZn) electrode by applying two scan rates (50 and 20 mVs(-1)). The synthesized polymer films were strongly adherent and homogeneous in both cases. Their corrosion performance was investigated by AC impedance spectroscopy (EIS) technique, anodic polarization plots and open circuit potential-time curves, in 3.5% NaCl solution. It was clearly seen that poly(o-anisidine) films provided a significant physical protection for longer exposure time. It was shown that polymer film coated at high scan rate (CuZn/POA-H) exhibited better barrier property against the attack of corrosive agents when compared with polymer film obtained at low scan rate (CuZn/POA-L). It was found out that poly(o-anisidine) film synthesized at high scan rate caused a significant increase in corrosion resistance by its catalytic behavior on formation of protective oxide layers on the surface in longer time. | en_US |
dc.description.sponsorship | The Scientific and Technical Research Council of Turkey (TUBITAK) [TBAGHD/135 (106TI98)] | en_US |
dc.description.sponsorship | The research project was funded by The Scientific and Technical Research Council of Turkey (TUBITAK), Project No: TBAGHD/135 (106TI98). | en_US |
dc.identifier.doi | 10.1007/s11814-008-0140-0 | |
dc.identifier.endpage | 853 | en_US |
dc.identifier.issn | 0256-1115 | |
dc.identifier.issue | 4 | en_US |
dc.identifier.scopus | 2-s2.0-52349107791 | en_US |
dc.identifier.scopusquality | Q2 | en_US |
dc.identifier.startpage | 846 | en_US |
dc.identifier.uri | https://doi.org/10.1007/s11814-008-0140-0 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12483/8935 | |
dc.identifier.volume | 25 | en_US |
dc.identifier.wos | WOS:000258549600038 | en_US |
dc.identifier.wosquality | Q3 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | Korean Inst Chem Engineers | en_US |
dc.relation.ispartof | Korean Journal of Chemical Engineering | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | coatings | en_US |
dc.subject | corrosion | en_US |
dc.subject | brass | en_US |
dc.subject | poly(o-anisidine) | en_US |
dc.subject | AC impedance | en_US |
dc.title | Poly(o-anisidine) on brass | en_US |
dc.type | Article | en_US |
Dosyalar
Orijinal paket
1 - 1 / 1