SILAR yöntemiyle üretilen ZnxCu1-xO (x= 0, 0.005 ve 0.010) filmlerin terleme düzeyini algılama özelliklerinin tespiti

dc.contributor.advisorŞahin, Bünyamin
dc.contributor.authorGürbüz, Elif
dc.date.accessioned2024-05-28T11:13:33Z
dc.date.available2024-05-28T11:13:33Z
dc.date.issued2018en_US
dc.departmentEnstitüler, Fen Bilimleri Enstitüsü, Fizik Ana Bilim Dalıen_US
dc.description.abstractBu Yüksek Lisans Tez çalışmasında nanoyapılı farklı oranlarda Zn katkılı bakır oksit (ZnxCu1-xO (x= 0, 0.005 and 0.010)) ince filmler SILAR yöntemi kullanılarak cam altlıklar üzerine büyütülmüştür. Üretilen filmlerin yüzey morfolojilerinin belirlenmesi için Taramalı Elektron Mikroskobu (SEM), kristallenme kalitesinin tayini için X-Ray (XRD), optik özellikler için Uv.Vis. Absorbans, terleme düzeyi algılanmasını belirlemek için ise akım-gerilim (I–V) ölçümleri yapılmıştır. SEM görüntülerine bakıldığında, üretilen filmlerin nano yapılı ve plate-like adlandırılan olarak formda olduğu, Zn katkılama oranı artarken parçacık boyutunun da değiştiği gözlenmiştir. X-Ray ölçüm sonuçlarından Zn katkısına bağlı olarak örgü yapısında meydana gelen değişimin bir sonucu olarak pik şiddetlerinin değiştiği görülmüştür. Uv-Vis optiksel soğurma spektrumundan elde edilen bant aralığı (Eg) değerinin artan Zn oranı ile arttığı belirlenmiştir. CuO filmlerin 6 farklı konsantrasyon değerlerindeki yapay ter numunelerini algılama oranları ölçülmeye çalışılmış ve artan Zn değerleri ile de terleme düzeyini algılama oranının, yüksek konsantrasyon değerleri için yaklaşık % 82 arttığı belirlenmiştir.en_US
dc.description.abstractIn this master thesis, Zn doped nanostructured cooper oxide (ZnxCu1-xO (x= 0, 0.005 and 0.010)) films have been deposited on quartz substrates by using SILAR method. The morphological, microstructural, optical and hydration level sensing response of the produced CuO samples were characterized via Scanning Electron Microscopy (SEM), X-Ray diffraction (XRD) analyses, optical absorption spectra and current–voltage (I–V) measurements. The SEM images exhibit that the particle size of the CuO films are influenced by the concentration of zinc in the growth solution. The SEM images exhibit that all of the films are made of homogenous nanoparticles and nanostructured plate-like CuO morphology is noticed.The X-ray diffraction results showed that the intensities of main peaks changed after the Zn doping which implies the variation of lattice parameter. Optical band gap values (Eg) of the films increased with increasing zn content in the growth solution. The sweatsensing percentages of the CuO films were calculated for six different artificial sweat concentrations and the results exhibited that sweat sensing percentage increases with Zn doping by approximately 82% for high sweat concentrations.en_US
dc.identifier.endpage64en_US
dc.identifier.startpage1en_US
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/TezGoster?key=fS4sqEZr79C_n60Rk6MjFXsgHbCfi1-5xDp23fwdhJEA18BO3z2dlVLmBtY1ajJx
dc.identifier.urihttps://hdl.handle.net/20.500.12483/5298
dc.identifier.yoktezid522452en_US
dc.language.isoturen_US
dc.publisherHatay Mustafa Kemal Üniversitesien_US
dc.relation.publicationcategoryTezen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBiyomühendisliken_US
dc.subjectBioengineering ; Fizik ve Fizik Mühendisliğien_US
dc.titleSILAR yöntemiyle üretilen ZnxCu1-xO (x= 0, 0.005 ve 0.010) filmlerin terleme düzeyini algılama özelliklerinin tespitien_US
dc.title.alternativeDetermination of ZnxCu1-xO (x= 0, 0.005 and 0.010) films grown by the SILAR metoden_US
dc.typeMaster Thesisen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
522452.pdf
Boyut:
2.94 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text